RMS Masthead End Masthead
615 Hammett Bridge Road, Greer, SC 29650 Phone:  (864) 355-7900

Television to VCR Hookup
using
Standard Cable Connections

1. A standard cable can have either swrew mount connections or quick connections. cableend.jpg (26364 bytes)

 

Standard Screw Mount

 quickcable.jpg (45832 bytes)

 

Quick Mount
2. Connect one end of this cable to the TV outlet by screwing the connection on to the post. For the quick connect cable, slide the end over the post making certain to not bend the small wire inside the larger cable.
3. Connect the other end of this cable to the VCR outlet by screwing the connection on to the post. For the quick connect cable, slide the end over the post making certain to not bend the small wire inside the larger cable.
4. Turn on the power for both pieces of equipment. Set the television to cannel 3 (occasionally 4).   Make sure the selector switch on the back of the VCR matching the channel you are using on the television (usually 3). chnelsel.jpg (103195 bytes)
5. Load a video tape and press play on the VCR.
6. If the picture does not appear on the television press the TV/VCR button on the VCR or the remote control of the VCR. This will direct the signal to the television. tv-vcr.jpg (137075 bytes)